In just a few days we will board Aeolus and begin our journey north from Bainbridge Island to Friday Harbor in the San Juan Islands. The weather forecast is shaping up to be wonderful, with a high pressure system settling in to create fairly dry and even partly sunny weather. Winds are forecast to be mild from the SE.
In planning for this trip several bits of data become especially important. One is currents and of course the other is wind. Current in Admiralty Inlet can absolutely determine whether a displacement hull boat has any chance of forward progress. Luckily for us on this day, the dominant current this Saturday is ebbing from 8:45 all the way to 4:47. We will ride a river of water all the way from the Seattle area to Port Townsend.
View Sailing Bainbridge to Friday Harbor in a larger map
Tuesday, January 29, 2013
Sunday, January 13, 2013
Mantus passes first test on trip to Blake Island
Our family took advantage of a lovely Sunday with sunshine to jump aboard Aeolus and head over to our nearby park island. Blake Island is a State Park and the only whole island park anywhere near Seattle. It isn't very wild, or especially interesting, but it's here, and has some nice urban views from the shoreline.
Weather here has turned cold and clear, and in Seattle we will always take this combination as a break from cold and raining. So off we went to Blake and enjoyed a lively game of family frisbee and walked a few miles on the island trails.
Perhaps the most exciting news for this blog is that we got to try out our new Mantus anchor for the first time. We anchored in about 25 feet of water on a little shelf off the island and I let out 75 feet of chain. When we pulled back on the anchor to set it, we came to a definite stop. We then let ourselves sag forward a bit, and then I pulled back again and once more we came to a sudden halt. Well, I thought, that sure seems like a well dug in anchor!
When we were ready to leave we came back and Elliott helped as he does controlling the windlass from inside the pilothouse while I was on the bow handling the anchor. When we pulled up to about 1:1 the windlass actually bogged down a bit and had a moment of struggle to free the Mantus from the seabed. Let me tell you something, that never happened with our CQR. And our windlass is a 1000W Lofrans Tigres. A really beautiful beast.
So the Mantus set right away into a mud/sand bottom, held the boat firm when tugged back, and then was a bit hard to pull out with our windlass until we were really 1:1. I would say that is great news for this anchor and I am excited about giving some more work in the months ahead.
Elliott putting his back into it! Anchored at Blake Island. |
Perhaps the most exciting news for this blog is that we got to try out our new Mantus anchor for the first time. We anchored in about 25 feet of water on a little shelf off the island and I let out 75 feet of chain. When we pulled back on the anchor to set it, we came to a definite stop. We then let ourselves sag forward a bit, and then I pulled back again and once more we came to a sudden halt. Well, I thought, that sure seems like a well dug in anchor!
Sand is evidence of it digging in! |
So the Mantus set right away into a mud/sand bottom, held the boat firm when tugged back, and then was a bit hard to pull out with our windlass until we were really 1:1. I would say that is great news for this anchor and I am excited about giving some more work in the months ahead.
Friday, January 11, 2013
Ground Tackle Upgrade: Mantus Anchor and less chain
The new Mantus on the right is a great improvement |
When we first bought her she had a ground tackle system I cannot quite recall, because I so soon upgraded it to something that has served her pretty well now since that time. She came with a 35lb CQR anchor, and I think they had that on a short amount of 5/16'BBB chain and rope. I replaced that original chain with 200' of 3/8'BBB and 150' of 5/8' 3 strand nylon.
Friday, January 4, 2013
New stern line and bag system
For us NW boaters, a stern line is as necessary as an anchor in many anchorages. You simply cannot stay in many of the prettiest places in the Salish Sea without some way to prevent your stern from swinging. This is caused by some combination of the depth of water, slope of seabed or popularity of the spot. Sometimes all three.
On Aeolus, we have always used a simple system that met the criteria of doing the job. But like many simple systems that do jobs, it left a lot to be desired. Or rather, it provided ample opportunity for improvement, which is one of my favorite things to do! We used a plastic 5 gallon bucket to hold about 150' of 3/8 3 strand yellow nylon line. This was enough line to reach shore everywhere, but often not enough to double back to the boat. This means we had to go to shore to release our stern line every time, which was sometimes annoying at O'dark thirty. The bucket was used for nothing else, and took up a fair amount of space in the lazarette. And coiling the 3 strand back into the bucket was a real PIA.
The completed bag playing piano! |
On Aeolus, we have always used a simple system that met the criteria of doing the job. But like many simple systems that do jobs, it left a lot to be desired. Or rather, it provided ample opportunity for improvement, which is one of my favorite things to do! We used a plastic 5 gallon bucket to hold about 150' of 3/8 3 strand yellow nylon line. This was enough line to reach shore everywhere, but often not enough to double back to the boat. This means we had to go to shore to release our stern line every time, which was sometimes annoying at O'dark thirty. The bucket was used for nothing else, and took up a fair amount of space in the lazarette. And coiling the 3 strand back into the bucket was a real PIA.
Mesh bottom for drainage and breathing. This mesh is fiber reinforced. |
Subscribe to:
Posts (Atom)